Oil, Hydrocarbon and Chlorophyll-A Measurement Targets
Explore the oils, hydrocarbons and chlorophyll-A measurements covered by TD-550, TD-560, TD-120 and CF-200. Each selection depends on target, range, matrix and sampling mode.
Choose the Measurement Your Process Needs
Start with the target and decide whether portable grab-sample analysis or continuous online monitoring is required. Then review the suggested product and confirm the application with PMA.
TD-550
Portable analysis for crude oil, diesel, lubrication oils and other heavier petroleum targets.
TD-560
Dual-channel portable analysis extending coverage to BTEX, condensates, gasoline and lighter fuels.
TD-120
Continuous online oil-in-water monitoring with fast response, alarms and process outputs.
CF-200
Continuous chlorophyll-A monitoring for algae-bloom indication in fresh water and seawater.
Crude oil
Use TD-550 for portable samples or TD-120 when continuous monitoring is required.
Diesel
Portable measurement is supported by TD-550 and TD-560; TD-120 supports continuous detection.
Lubrication oils
TD-550 provides portable analysis, while TD-120 suits fixed continuous leak detection.
Fuel oils
Measure portable samples with TD-550 or use TD-120 for continuous process protection.
Gas condensates
Choose the TD-560 second optical channel for portable condensate measurement.
BTEX
Choose TD-560 for portable analysis of lighter aromatic hydrocarbon targets.
Gasoline
TD-560 is the portable choice; TD-120 can provide continuous application-specific monitoring.
Jet fuel
Use TD-560 for portable grab samples or TD-120 for suitable continuous detection.
Kerosene
The TD-560 second channel extends portable measurement to kerosene and lighter fuels.
Hydraulic oils
TD-560 supports portable analysis of hydraulic oils using target-specific calibration.
Heat-transfer fluids
Choose TD-560 for portable work or TD-120 for continuous leak monitoring.
Phenol
TD-560 supports portable phenol measurement and TD-120 lists phenol among online targets.
Produced water
Use portable TD-550 or TD-560 checks, or TD-120 for continuous treatment optimisation.
Cooling water
TD-550 supports portable investigation; TD-120 provides continuous leak detection.
Steam condensate
TD-120 provides continuous oil monitoring, supported by portable follow-up sampling.
Intake protection
Use TD-120 for hydrocarbon ingress or CF-200 for chlorophyll-A and algae loading.
Seawater chlorophyll-A
CF-200 measures chlorophyll-A from 0 to 100 μg/L in seawater applications.
Freshwater chlorophyll-A
CF-200 measures chlorophyll-A from 0 to 500 μg/L in fresh-water applications.
Algae-bloom indication
CF-200 provides continuous trends, local display, relays and 4-20 mA output.